Heating The Debate!

ISIS Fluid Control Supply Isotherm Heat Exchanger Packages to the Houses of Parliament

Published: 3rd December 2012 | Issue 23 Share article:

With the well publicised multi million pound refurbishment of the Palace of Westminster under way, ISIS Fluid Control worked closely with MITIE Built Environment to supply several steam to water Isotherm heat exchanger packages to serve the low temperature hot water requirements to the Palace whilst the refurbishment goes ahead.

The Isotherms ranged from an output of 2.2 MW to 800 KW and were supplied as compact skid mounted assemblies. The ISIS units were chosen due to there ability to utilise the existing plant steam and reliably supply low temperature hot water at 82°C. Due to the plant room size constraints ISIS took a lot of consideration into the skid design to make them fit into the space provided. Due to the narrow access it was also required that ISIS dismantled and rebuilt the units in situ to physically gain access to the plant room. The packages incorporated VALSTEAM ADCA control valves and steam traps and all of the temperature controls required to supply a complete ‘plug and Play’ solution.

With the VALSTEAM ADCA range of products and our technical steam knowledge ISIS Fluid Control can offer all valves and packaged solutions required for a steam system. Couple this with our Worcester Norbro, Asco and large process valve range we can competitively supply all valves for your process systems also.

If you require a site visit or any further information regarding ISIS please do not hesitate to contact us. sales@isis-fluid.com

ISIS Fluid Control Ltd
Tel: 01608 645755
www.isis-fluid.co.uk

Search related articles:   Isis Fluid Control LtdIssue 23Company News

Recent magazine news articles