ASCO’s High Flow Filter Regulators
ASCO Numatics high flow filter regulators enable Ascendant Technologies to offer more responsive valve solutions
Series 342 stainless steel filter regulators reduce closing time of valves
Filter regulator flow rates are critical in determining the time required to close a valve. ASCO Numatics ½"″ stainless steel filter regulators incorporate moulded reinforced diaphragms, which enable a flow rate up to 4430 l/min. Following performance tests, Ascendant Technologies concluded that the ASCO regulator reduced the valve closure time from 11.7 to 7 seconds.
“To meet end user requirements, we needed to improve the response speed of our valve solution,” said Andy McDuff, General Manager, Ascendant Technologies. “We tested a number of filter regulators from different suppliers and the ASCO device outperformed its rivals, helping to significantly reduce the valve closing time.”
For Emergency Shut-Down (ESD) applications the response time of the valve can be critical. If the filter regulator is unable to pass enough air to enable the actuator to close the valve in the specified time, then a booster may need to be fitted. This adds to the overall cost and increases the number of potential leak points.
The Series 342 is suitable for ambient temperatures from -40°C up to +80°C (-50°C for arctic conditions is available on request) and for compressed air and gases. It can therefore be installed across many industries, including chemical, petrochemical, oil & gas, refinery, power generation, pulp & paper and process plants.
ASCO Numatics Ltd
Tel: 01695 713600
www.asconumatics.co.uk
Search related articles: Emerson Automation Fluid Control & Pneumatics UK LtdIssue 26FRLs