Aquaflow Non-Slam Check Valve Success

Published: 2nd August 2012 | Issue 21

The Aquaflow new non-slam check valve

Valve manufacturer Aquaflow Valves are delighted with their success of the new non-slam check valve. Having supplied a high number of the valves this month to projects at Severn Trent Water, Sutton and East Surrey and also internationally in Hong Kong.

These high performance valves are designed for systems prone to high velocities and rapid flow reversal; having non-slam characteristics and reducing the damaging effects of water hammer. Slam reduction is achieved through body profile design and door configuration. Another key advantage to this valve is that there are no mechanical mechanisms that could prove costly to repair or replace.

Other key advantages of the non-slam check valve:

• Designed to exceed EN12334 and rated to 16 Bar (PN25 on request)
• Single door units are available from stock (Multidoor on request)
• Available in sizes from DN100 to DN1400
• Bypass arrangements
• An inspection cover and air release point

Aquaflow Valves
Tel: 01630 647111
Website: www.aquaflowvalves.com

TT Flow

Telephone:	+44 (0)1630 647200
Email:	ttflow@ttpumps.com
Website:	https://www.ttpumps.com/products/valves
	More information on the TT Flow BVAA Member Directory Page