Dupont O-Rings Increase Sealing Performance for Processing Applications

Published: 26th June 2013 | Issue 25

Kalrez® Spectrum™ perfluoroelastomer O-rings from the Du- Pont™ Performance Elastomers range have been successfully used to minimise the risk of premature seals failure, increase MTBF times and significantly reduce costly downtime for hydraulic clamping systems.

The clamping products were manufactured by a leading European manufacturer of heavyduty systems for applications in the metals, plastics and rubber processing industries. They utilise highly aggressive Oemeta HF/ DU hydraulic fluids, working at operating temperatures of 250°C, and are used to retain large hot dies in exact positions on forging machines, and also secure hot moulds in injection moulding equipment. The clamping products are designed to withstand pressures of up to 400 bar at maximum temperatures. Any leakages of hydraulic fluid from the multiple pistons utilised to apply the clamping forces of 25 to 1250 kN could not be accepted.

By switching to the Kalrez® Spectrum™ 7075 sealing parts for their hydraulic pumps range, the manufacturer could offer a long-term resistance to aggressive fluids, as well as operating temperatures of 250°C, coupled with increased reliability for their systems, while also achieving cost savings. Previously, other sealing solutions needed replacements due to seal failures after only a few months of operation. Since refitting with the Kalrez seals, the clamping systems have operated without problems or seal replacements for over 18 months. The company service intervals for their pressure cylinders have been considerably extended, providing cost savings and increased overall reliability for their clamping system. It has also allowed the company to offer new areas of application for their products to their existing and new users.

The sealing products in the DuPont™ Performance Elastomers range are available in the UK from Dichtomatik Ltd, an authorised distributor. The Kalrez® Spectrum™ 7075 product offers enhanced physical performance properties including very low compression set and maximum service temperatures up to 327°C. This makes it an ideal choice for mechanical seals, valves, flanges and other demanding chemical and hydro-carbon processing applications. It is a carbon black filled compound designed for use as O-rings or custom sealing components combining long-term performance, low compression set and longer service life.

Dichtomatik Ltd
Tel: 01332 524401
www.dichtomatik-kalrez.co.uk

Freudenberg Sealing Technologies Ltd

Telephone:	01332 524 400
Email:	sales.derby@fst.com
Website:	https://on.fst.com/process-industry
	More information on the Freudenberg Sealing Technologies Ltd BVAA Member Directory Page